What is the material of carbon steel plate and what are its advantages and disadvantages
Release time:
2023-10-28
It is a type of steel with a carbon content lower than 2.11% and without intentionally adding metallic elements, and can also be called plain carbon steel or carbon steel. In addition to carbon, it also contains a small amount of elements such as silicon, manganese, sulfur, and phosphorus inside. The higher the carbon content, the better the hardness and strength, but the lower the plasticity.
What material is carbon steel plate
It is a type of steel with a carbon content lower than 2.11% and without intentionally adding metallic elements, and can also be called plain carbon steel or carbon steel. In addition to carbon, it also contains a small amount of elements such as silicon, manganese, sulfur, and phosphorus inside. The higher the carbon content, the better the hardness and strength, but the lower the plasticity.
What are the advantages and disadvantages of carbon steel plates
The advantages of carbon steel plates are:
1. After heat treatment, the hardness and wear resistance can be improved.
2. When annealing, the hardness is appropriate and the cutting ability is good.
3. Its raw materials are very common, so it is easy to find, so the production cost is not high.
The disadvantages of carbon steel plates are:
1. His thermal hardness is not good. When used as a cutting tool material, if the temperature exceeds 200 degrees, the hardness and wear resistance will deteriorate.
2. His hardenability is poor. When water quenched, the diameter is usually maintained at 15 to 18 millimeters, while when not quenched, the diameter and thickness are usually 6 millimeters, making it prone to deformation or cracking.
What is the classification of carbon steel
1. According to their usage, they can be divided into three categories: structural steel, tool steel, and free cutting structural steel.
2. According to the smelting process, it can be divided into three types: open-hearth steel, converter steel, and electric furnace steel.
3. According to the deoxygenation pathway, it can be divided into boiling steel, killed steel, semi killed steel, and special killed steel.
Latest News
How to determine the specifications of channel steel
The delivery length of channel steel can be divided into two types: fixed length and double length, and the tolerance value shall be specified in the corresponding standards. The length selection range of domestic channel steel is divided into three types based on different specifications: 5-12m, 5-19m, and 6-19m. The length selection range of imported channel steel is generally 6-15m.
2022-09-16
How are stainless steel pipes classified?
Stainless steel pipes are divided into ordinary carbon steel pipes, high-quality carbon structural steel pipes, alloy structural pipes, alloy steel pipes, bearing steel pipes, stainless steel pipes, as well as bimetallic composite pipes, coated and coated pipes to save precious metals and meet special requirements. There are various types and uses of stainless steel pipes, with varying technical requirements and production methods. The current production of steel pipes has an outer diameter range of 0.1-450mm and a wall thickness range of 0.01-250mm. To distinguish its characteristics, steel pipes are usually classified according to the following method.
2023-03-06
Discount SPCC Carbon Steel Plate: The Best Choice for Your Steel Needs
Steel is an essential material commonly used in various industries due to its durability, strength, and versatility. One of the most commonly used types of steel is carbon steel, which is known for its cost-effectiveness and excellent mechanical properties. Among the several types of carbon steel, Discount SPCC Carbon steel plate has gained popularity among industries because of its excellent properties and cost-effectiveness.
2022-09-08
Characteristics of copper pipes
Lightweight, with good thermal conductivity and high low-temperature strength. Commonly used in the manufacturing of heat exchange equipment (such as condensers). It is also used for assembling low-temperature pipelines in oxygen production equipment. Copper pipes with small diameters are commonly used for conveying pressurized liquids (such as lubrication systems, oil pressure systems, etc.) and as pressure measuring pipes for instruments.
2023-03-24
I-shaped beams are hollow web members. For high-strength materials, hollow web members are better than solid web members in terms of weight, material, and labor saving. This cross-sectional design mainly uses the flange farthest from the centroid to resist bending moments (because the farther the flange is, the greater the moment of inertia), and mainly uses the web to resist shear. As for the inconvenience in making it, it can be solved by factory or molding. Saving materials, labor, and time is efficiency.
2023-03-14
Preparation method of carbon steel pipe
The raw material of carbon steel pipe is round tube blank, which needs to be cut and processed by a cutting machine to form a billet with a length of about 1 meter, and then sent to the furnace for heating through a conveyor belt. The billet is fed into the furnace for heating, with a temperature of approximately 1200 degrees Celsius.
2022-09-16
CONTACT US
Tel :+8615315588389
E-mail :zoey@sdgbjck.com
WhatApp :+8615315588389
Address: Dongchang Mansion, Liaocheng City, Shandong Province
GET A FREE QUOTE
Copyright : Shandong Zhongwei Metal Products Co., Ltd. Powerby : 300.cn jinan2 SEO Business license
