What are the inspection standards for color coated rolls
Release time:
2022-09-16
Inspect the appearance of the color coated roll, including the smoothness, color, and absence of obvious scratches, dents, bubbles, foreign objects, etc. on the coating surface. The appearance requirements should meet the product specifications and relevant national standards.
Color coated roll (color coated roll) is a metal material with high decorative, anti-corrosion, and weather resistance, widely used in fields such as architecture, home appliances, and automobiles. The inspection standards for color coated rolls mainly include the following aspects:
Appearance quality
Inspect the appearance of the color coated roll, including the smoothness, color, and absence of obvious scratches, dents, bubbles, foreign objects, etc. on the coating surface. The appearance requirements should meet the product specifications and relevant national standards.
Dimension and Tolerance
Check the width, thickness, length and other dimensions of the color coated roll, as well as whether its tolerance meets the product specifications and relevant national standards.
Coating performance
The coating performance includes coating thickness, adhesion, hardness, wear resistance, corrosion resistance, etc. The testing of coating performance should be carried out in accordance with relevant national standards and industry norms.
Weather resistance
Weathering resistance refers to the anti-aging, UV resistance, salt fog resistance, moisture resistance and other properties of color coated roll in the natural environment. Weather resistance testing can refer to relevant standards and specifications.
Mechanical properties
Mechanical properties include bending, tensile strength, yield strength, elongation, etc. When inspecting the mechanical properties of color coated rolls, relevant standards and specifications should be referred to.
chemical composition
Inspect the chemical composition of the color coated roll, mainly including the composition of the coating material and the composition of the metal substrate. The detection of chemical composition should be carried out in accordance with relevant national standards and industry norms.
Latest News
How to determine the specifications of channel steel
The delivery length of channel steel can be divided into two types: fixed length and double length, and the tolerance value shall be specified in the corresponding standards. The length selection range of domestic channel steel is divided into three types based on different specifications: 5-12m, 5-19m, and 6-19m. The length selection range of imported channel steel is generally 6-15m.
2022-09-16
How are stainless steel pipes classified?
Stainless steel pipes are divided into ordinary carbon steel pipes, high-quality carbon structural steel pipes, alloy structural pipes, alloy steel pipes, bearing steel pipes, stainless steel pipes, as well as bimetallic composite pipes, coated and coated pipes to save precious metals and meet special requirements. There are various types and uses of stainless steel pipes, with varying technical requirements and production methods. The current production of steel pipes has an outer diameter range of 0.1-450mm and a wall thickness range of 0.01-250mm. To distinguish its characteristics, steel pipes are usually classified according to the following method.
2023-03-06
Discount SPCC Carbon Steel Plate: The Best Choice for Your Steel Needs
Steel is an essential material commonly used in various industries due to its durability, strength, and versatility. One of the most commonly used types of steel is carbon steel, which is known for its cost-effectiveness and excellent mechanical properties. Among the several types of carbon steel, Discount SPCC Carbon steel plate has gained popularity among industries because of its excellent properties and cost-effectiveness.
2022-09-08
Characteristics of copper pipes
Lightweight, with good thermal conductivity and high low-temperature strength. Commonly used in the manufacturing of heat exchange equipment (such as condensers). It is also used for assembling low-temperature pipelines in oxygen production equipment. Copper pipes with small diameters are commonly used for conveying pressurized liquids (such as lubrication systems, oil pressure systems, etc.) and as pressure measuring pipes for instruments.
2023-03-24
I-shaped beams are hollow web members. For high-strength materials, hollow web members are better than solid web members in terms of weight, material, and labor saving. This cross-sectional design mainly uses the flange farthest from the centroid to resist bending moments (because the farther the flange is, the greater the moment of inertia), and mainly uses the web to resist shear. As for the inconvenience in making it, it can be solved by factory or molding. Saving materials, labor, and time is efficiency.
2023-03-14
Preparation method of carbon steel pipe
The raw material of carbon steel pipe is round tube blank, which needs to be cut and processed by a cutting machine to form a billet with a length of about 1 meter, and then sent to the furnace for heating through a conveyor belt. The billet is fed into the furnace for heating, with a temperature of approximately 1200 degrees Celsius.
2022-09-16
CONTACT US
Tel :+8615315588389
E-mail :zoey@sdgbjck.com
WhatApp :+8615315588389
Address: Dongchang Mansion, Liaocheng City, Shandong Province
GET A FREE QUOTE
Copyright : Shandong Zhongwei Metal Products Co., Ltd. Powerby : 300.cn jinan2 SEO Business license
